Skip to content
 ◇White-Glove Delivery ◇1-Year Limited Warranty ◇30-Day Returns 
Antok Signature
Account
Menu
Curated MirrorsFind your signature style
Timeless DesignClassic to contemporary
Size OptionsFind your perfect fit
Here to HelpAsk us about your mirror

ANTOK Signature User Manual

ANTOK Signature · Owner resources

A considered start.

Placement options and illustrated wall-mount instructions from the ANTOK Signature User Manual.

View / download the original PDF ↗

01 · Read first

Prepare with care.

Before you begin

The mirror contains fragile glass. Protect yourself from cuts and keep children away during installation. Styles and rear mounting brackets may vary.

This is a general guide. Use only the placement method supported by your actual mirror. A freestanding position requires a built-in support. Before drilling, confirm that the wall, fixings and mounting points are suitable for the mirror; ask a qualified installer if you are unsure. The manual does not specify wall load ratings, drill sizes or screw-head clearance measurements.

02 · Full-length mirrors

Choose the right placement.

Wall-mounted

Mounted on the wall to save floor space. The manual illustrates bedrooms, entryways, walk-in closets and smaller spaces.

Leaning

Positioned against a wall. Use this option only where it is appropriate for your mirror and can remain stable.

Standing

Supported independently by a built-in stand. This option applies only to models equipped with that support.

Original manual, page 4: full-length mirror placement options
Original manual, page 4: full-length mirror placement options · Select the image to view it at full size.

03 · Check the parts

Installation accessories.

The general manual illustrates 3 expansion anchors and 3 screws (labelled “EXPANSION SCREWS*3” and “SCREWS*3”). Its hanging sequence uses two rear mounting points. Check the actual contents and mounting brackets supplied with your mirror before starting.

04 · Six-step sequence

Wall-mount installation.

  1. Measure the mirrorMeasure the distance between the two mounting brackets on the back of the mirror. Bracket styles may vary.
  2. Mark the wallTransfer the measurement to the wall and mark the two drilling points at your desired height.
  3. Drill the holesDrill holes at the marked points using a suitable drill bit.
  4. Insert wall anchorsGently tap the wall anchors into the drilled holes until they are flush with the wall.
  5. Install the screwsDrive the screws into the anchors, leaving the screw heads slightly exposed for hanging.
  6. Hang the mirrorCarefully hang the mirror on the screws and check that it is secure and level.
Original manual, page 5: accessories and six-step full-length mirror installation
Original manual, page 5: accessories and six-step full-length mirror installation · Select the image to view it at full size.

05 · Wall mirrors

Above a table or against a wall.

The manual also illustrates a wall mirror mounted above a table, or resting on a tabletop and leaning against a wall. Suitability depends on the actual mirror, supporting surface and installation conditions.

Original manual, page 6: wall mirror placement options
Original manual, page 6: wall mirror placement options · Select the image to view it at full size.

Wall mirrors follow the same six-step mounting sequence shown above.

View the wall-mirror installation diagram
Original manual, page 7: six-step wall mirror installation
Original manual, page 7: six-step wall mirror installation · Select the image to view it at full size.

About this guide.

This page presents the installation content of the general ANTOK Signature User Manual, with additional model-compatibility reminders. The original PDF remains available above. The manual does not specify individual product materials, mirror weights, moisture ratings, cleaning methods or warranty terms. For those questions, consult the relevant product information or contact our team.